Commercial Keyless Entry Systems: Keypad, Card Access & Smart Lock Buyer’s Guide (2026)
Quick answer: A commercial keyless entry system replaces mechanical keys with a code, card, fingerprint, or mobile credential. For a small number of doors, a standalone electronic keypad is the lowest-cost option. For multiple doors with audit trails or compliance needs, a networked or cloud-managed system is the better long-term choice. Specify ANSI/BHMA Grade 1 hardware, confirm fire-rating and life-safety compliance, and verify ADA-compliant lever operation before purchase.
Published by B&H Depot LLC (bandhdepot.com), a commercial door hardware distributor since 2006 with 26 US warehouse locations.
Table of Contents
- 7 Types of Commercial Keyless Entry
- Technology Comparison Table
- Brand Comparison
- Standalone vs. Networked
- Recommendations by Building Type
- Key Specifications
- Installation Considerations
- Total Cost of Ownership
- Migration Checklist
- FAQs
7 Types of Commercial Keyless Entry
1. Mechanical Pushbutton / Cipher Locks
No batteries or wiring. A shared code opens the door. Best for utility rooms and low-traffic interior doors. ANSI/BHMA Grade 1 and Grade 2 available. Brands: dormakaba (Simplex), Lockey, Codelocks.
2. Standalone Electronic Keypads
Battery-powered locks storing 100 to 5,000+ user codes with on-lock audit logs. Each lock is managed individually. Best for single doors and small offices. Brands: Alarm Lock Trilogy, Schlage, dormakaba.
3. Proximity / RFID Card Access
Readers accept cards, fobs, or smart cards (125 kHz prox, 13.56 MHz MIFARE, iCLASS/SEOS). Lost cards are deactivated without changing locks. Scales from one door to thousands. Best for offices, schools, and multifamily. Brands: HID, Schlage, ASSA ABLOY.
4. Smart Locks (Wi-Fi / Bluetooth / Z-Wave)
Wireless locks managed from a mobile app or web dashboard. Good for light commercial, managed properties, and remote management. Verify commercial grade rating. Brands: Schlage Encode, Yale, dormakaba.
5. Biometric (Fingerprint)
Authenticate by fingerprint. Cannot be shared like codes or cards. Pair with a backup credential (card or PIN). Check state biometric data privacy laws. Best for server rooms, pharmacies, and labs.
6. Multi-Credential Systems
Accept multiple credential types on the same door (keypad + card, card + mobile, card + fingerprint). Can require two factors (card + PIN) for high-security areas. Enable gradual migration between technologies.
7. Networked / Cloud-Managed Access Control
Doors, controllers, and readers connected to centrally managed software. Add/remove users, set schedules, receive alarms, and pull audit reports from one dashboard. Integrates with video, alarm, elevator, and HR platforms. Cloud platforms charge per-door or per-user subscriptions. Best for multi-door facilities and regulated environments.
\n\nTechnology Comparison Table
| Technology | Credentials | Power | Users | Best For | Price Range (per door) |
|---|---|---|---|---|---|
| Mechanical pushbutton | Button combination | None | Shared code | Storerooms, utility rooms | $150 - $500 |
| Standalone electronic keypad | PIN code | Batteries | 100 - 5,000+ | Single doors, small offices | $250 - $900 |
| Proximity / RFID card | Card, fob, smart card | Batteries or wired | Hundreds to thousands | Offices, schools, multifamily | $400 - $1,500 |
| Smart lock (Wi-Fi/BT/Z-Wave) | Mobile app, PIN, card | Batteries | Dozens to hundreds | Light commercial, managed properties | $200 - $800 |
| Biometric (fingerprint) | Fingerprint + backup | Batteries or wired | Dozens to thousands | Server rooms, labs, pharmacies | $500 - $2,000 |
| Networked / cloud (multi-credential) | Card, PIN, mobile, biometric | PoE, 12/24V, or batteries | Enterprise scale | Multi-door facilities, compliance | $800 - $3,000+ |
Brand Comparison: 7 Commercial Manufacturers
Schlage (Allegion)
ND Series (cylindrical), L Series (mortise), AD Series (networked wireless), CO Series (standalone electronic), NDE/LE (wireless networked). Grade 1 across all commercial lines. Widely specified in education, healthcare, and government.
Yale / ACCENTRA (ASSA ABLOY)
AU Series (cylindrical), 8800 Series (mortise), InTouch and nexTouch (standalone electronic and networked). Now sold under the ACCENTRA brand for commercial distribution. Grade 1 available across lines.
Corbin Russwin (ASSA ABLOY)
CL3300 Series (cylindrical), ML2000 Series (mortise), Access 700 (standalone electronic). Heavy-duty Grade 1 locks favored in institutional and high-abuse environments.
Sargent (ASSA ABLOY)
10 Line (cylindrical), 8200 Series (mortise), Profile Series (networked wireless). Known for durability in high-traffic commercial applications. Grade 1 across all lines.
ASSA ABLOY (HES / Securitron)
HES electric strikes (1006, 5000, 9600 Series), Securitron electromagnetic locks and power supplies. Used when pairing standalone readers with electrified hardware rather than replacing the lockset.
Alarm Lock / Napco
Trilogy T2 and T3 (standalone keypad with audit trail), DL2700/DL3000/PDL Series, Networx (wireless networked). Strong in retrofit and add-on electronic access where existing hardware stays.
dormakaba
Simplex (mechanical pushbutton), E-Plex (standalone electronic), Saflok/Confidant (hospitality and multifamily), 710/740 Series (wireless networked). Covers the full range from mechanical to enterprise networked.
\n\nStandalone vs. Networked Architecture
| Feature | Standalone | Networked / Cloud |
|---|---|---|
| Management | At each lock individually | Central dashboard for all doors |
| User changes | Walk to the lock or use handheld programmer | Instant from any browser or app |
| Audit trail | On-lock log, downloaded manually | Real-time, centralized, exportable |
| Schedules | Limited or none | Per-door, per-group, holiday overrides |
| Alarms / alerts | None or local buzzer | Forced entry, door held open, lockout alerts |
| Wiring | None (battery powered) | PoE, 12/24V, or wireless (battery with hub) |
| Upfront cost | Lower per door | Higher (controllers, software, wiring) |
| Ongoing cost | Batteries only | Software license, maintenance, batteries for wireless |
| Best door count | 1 - 10 doors | 5+ doors, especially multi-site |
Recommendations by Building Type
| Building Type | Recommended Technology | Key Considerations |
|---|---|---|
| Office | Standalone keypad or card access; networked for 10+ doors | Employee turnover, after-hours access, audit trails for compliance |
| School (K-12) | Networked card/fob access with lockdown capability | Lockdown integration, visitor management, classroom function locks, state security grants |
| Healthcare | Networked multi-credential with integration | HIPAA audit trails, ligature-resistant hardware, patient wandering prevention, pharmacy access |
| Multifamily | Smart locks or card access per unit; networked for common areas | Tenant turnover, remote code management, package rooms, common area scheduling |
| Retail | Standalone keypad for back rooms; card for POS and cash areas | Employee shift changes, limited IT infrastructure, theft prevention |
| Government | Networked multi-credential with PIV/CAC card support | FICAM compliance, FIPS 201 readers, HSPD-12, audit requirements, SAM registration for vendors |
| Industrial / Warehouse | Mechanical pushbutton or standalone keypad; networked for perimeter | Harsh environment ratings, glove-friendly keypads, loading dock scheduling |
Key Specifications
- ANSI/BHMA Grade: Grade 1 is required for high-traffic commercial doors. Grade 2 is acceptable for interior low-traffic doors. Grade 3 is residential only.
- Credential types: PIN, proximity card (125 kHz), smart card (13.56 MHz MIFARE/DESFire/SEOS), mobile (BLE/NFC), fingerprint, or combinations.
- Battery life: Standalone locks typically last 1 to 3 years on 4 AA batteries depending on traffic. Smart locks with Wi-Fi may need more frequent changes.
- Fire code compliance: Locks on fire-rated doors must be listed for that application. Exit doors must allow free egress from inside without a credential. Electric strikes and maglocks on fire doors need fire-rated listings and release on fire alarm.
- ADA requirements: Lever trim, no tight grasping/pinching/twisting, operable with one hand with max 5 lbf. Keypads and card readers mounted at ADA-compliant height (34 to 48 inches).
- Weather ratings: Exterior locks must handle temperature extremes, moisture, and UV. Check IP rating or the manufacturer's outdoor rating before specifying for exterior doors or gates.
Installation Considerations
- Door preparation: Cylindrical locks use a standard bored hole (2-1/8 inch face, 1 inch edge). Mortise locks need a mortise pocket. Confirm door thickness and backset.
- Handing: Many electronic and smart locks are field-reversible. Some lever trims and exit device trims are handed. Confirm before ordering.
- Power: Battery-powered standalone and wireless locks need no wiring. Wired electric strikes and maglocks need a power supply (12 or 24 VDC) and low-voltage wiring to each door.
- Network: Networked locks need either Ethernet/PoE runs, a wireless hub within range, or Wi-Fi coverage at each door. Plan for network drops during the construction phase.
- Existing hardware: When retrofitting, check whether the new lock fits the existing door prep or requires modification. Card readers paired with electric strikes can often keep the existing mechanical lockset.
- Low-voltage contractor: Wired access control installation typically requires a licensed low-voltage contractor for wiring, conduit, and fire alarm integration.
Total Cost of Ownership
| Cost Category | Standalone (per door) | Networked (per door) |
|---|---|---|
| Hardware | $250 - $900 | $800 - $3,000+ |
| Installation | $50 - $200 (lock swap) | $300 - $1,500 (wiring, controllers, config) |
| Ongoing (annual) | $10 - $30 (batteries) | $50 - $300 (software license, batteries, maintenance) |
Standalone locks have lower upfront cost and are simpler to install, but management labor increases with door count. Networked systems cost more upfront but reduce ongoing management time and provide audit and compliance capabilities that standalone locks cannot.
\n\nMigration Checklist: Keyed to Keyless
- Inventory all doors: List every door that needs access control. Note door type, frame material, existing hardware, and traffic level.
- Define access groups: Who needs access to which doors, and when? Map employees/tenants to doors and schedules.
- Choose technology: Match technology to door count, user count, audit needs, and budget using the tables above.
- Check door prep: Confirm each door can accept the chosen lock without structural modification, or budget for door prep changes.
- Plan power and network: For wired systems, plan power supply locations, low-voltage wire runs, and network drops. For wireless, verify hub placement and signal coverage.
- Verify code compliance: Confirm fire-rating compatibility, ADA lever requirements, and free egress on exit doors.
- Order credentials: Budget for initial card/fob stock and plan credential distribution to all users.
- Schedule installation: Coordinate with building operations. Consider phased rollout starting with main entrances and high-security areas.
- Program and test: Load all users and schedules, test every door, verify audit log entries, and confirm lockout and alarm functions.
- Train users and staff: Provide written instructions for code/card use, lockout procedures, battery replacement, and who to contact for access changes.
- Establish ongoing management: Assign responsibility for adding/removing users, monitoring alarms, replacing batteries, and pulling audit reports.
- Keep mechanical key override: Retain a mechanical key override option on critical doors in case of electronic failure or dead batteries.
Frequently Asked Questions
1. What is the best keyless lock for a commercial office?
For a single door or small office, a standalone electronic keypad lock such as the Alarm Lock Trilogy or Schlage CO Series is a proven choice. For offices with 10 or more doors, a networked card access system provides centralized management and audit trails.
2. Do commercial keyless locks need batteries?
Mechanical pushbutton locks need no batteries. All other standalone electronic and smart locks run on batteries, typically 4 AA cells lasting 1 to 3 years. Wired electric strikes and maglocks run on a building power supply.
3. Can I replace my keyed lock with a keyless lock without changing the door?
In most cases, yes. Many electronic cylindrical locks fit a standard bored door preparation. Check the backset, door thickness, and cross bore dimensions against the new lock's specifications.
4. What is the difference between a card reader and a card-reader lockset?
A card-reader lockset is a complete lock with a built-in reader, replacing the entire lockset. A standalone card reader mounts on the wall and controls a separate electric strike or maglock, leaving your existing mechanical lock in place.
5. Are keyless locks ADA compliant?
Locks with lever trim that operates without tight grasping, pinching, or twisting, and with no more than 5 pounds of force, meet ADA requirements. Keypads and readers must be mounted at accessible heights (34 to 48 inches).
6. Can I use a keyless lock on a fire-rated door?
Yes, but the lock must be listed for use on fire-rated doors. It must allow free egress from the inside. Electric strikes and maglocks on fire doors must release on fire alarm and carry a fire-rated listing.
7. What happens if the batteries die?
Most commercial keyless locks have a low-battery warning weeks before failure. Many include a mechanical key override or an external battery jump contact. Specify a lock with a backup entry method for critical doors.
8. How many user codes can a standalone keypad lock hold?
Entry-level models hold about 100 codes. Mid-range models such as the Alarm Lock Trilogy hold up to 3,000. For more users or frequent changes, consider a networked system.
9. Standalone or networked: which should I choose?
Choose standalone for 1 to 10 doors with stable users and no compliance requirements. Choose networked for 5 or more doors, frequent user changes, audit trail needs, lockdown capability, or multi-site management.
10. Can B&H Depot help me specify a keyless entry system?
Yes. Call (561) 826-6018 or email sales@keylessaccesslocks.com. We carry all the brands listed in this guide and can help match the right technology to your doors, users, and budget.
About B&H Depot LLC
B&H Depot LLC (bandhdepot.com) is a commercial door hardware and access control distributor based in Boca Raton, Florida, operating since 2006. We stock over 1 million products from brands including Schlage, Yale/ACCENTRA, Corbin Russwin, Sargent, Von Duprin, LCN, HES, Alarm Lock, and dormakaba across 26 US warehouse locations. B&H Depot is SAM-registered (CAGE Code 4Q1E4, DUNS 080423290) and serves contractors, facility managers, property managers, government agencies, and institutional buyers nationwide. Phone: (561) 826-6018. Also visit KeylessAccessLocks.com for keyless and access control products.